Source: rigpix
Transceivers
Updated: 09/02/2026
Kenwood TS-950S Digital
Confidence score: 50%
Estimated value
628€
Theoretical estimate
534€
Minimum
723€
Maximum
Specifications
GENERAL
- Type
- Amateur HF transceiver
- Frequency range
- TX: 10-160 m + WARC RX: 0.1-30 MHz
- Tuning steps
- AM/FM: 100 Hz SSB/CW/FSK: 10 Hz
- Frequency stability
- ±0.5 ppm @ -10 to +50°C (14 to 122°F)
- Mode
- AM / FM / SSB / CW / FSK
- Channels / memory management
- 100 regular RAM storage with lithium battery backup
- Repeater shift / offset
- No dedicated. Use VFO A/B split instead Offset trace function
- Power supply
- Mains: 120 / 220 / 230 / 240 VAC ±10% (Fixed power cord) (Voltage varies depending on market)
- Current drain / power consumption
- RX: 110 W (No signal) TX: Max 700 W
- Antenna impedance / connector
- 50 ohm / SO-239 (RX/TX) 50 ohm / Phono (RCA), for RX only
- Dimensions (W*H*D)
- 409*154*446 mm (16.1*6.06*17.56")
- Weight
- 23 Kg (50.71 lb)
- Other features
- CTCSS/PL encoder. 1750 Hz repeater tone. Built-in Auto-ATU and keyer. 500 KHz marker.
RECEIVER SECTION
- Receiver system
- Main RX: Triple conversion superheterodyne (FM) 1st IF: 73.05 MHz 2nd IF: 8.83 MHz 3rd IF: 455 KHz Main RX: Quadruple conversion superheterodyne (AM/SSB/CW/FSK) 1st IF: 73.05 MHz 2nd IF: 8.83 MHz 3rd IF: 455 KHz 4th IF: 100 KHz Sub RX: Double conversion superheterodyne (SSB/CW/FSK) 1st IF: 40.055 MHz 2nd IF: 10.695 MHz
- Sensitivity
- AM (10 dB S+N/N) 0.1-0.15 MHz: 25 uV 0.15-0.5 MHz: 10 uV 0.5-1.62 MHz: 32 uV 1.62-30 MHz: 2 uV FM (12 dB SINAD) 28-30 MHz: 0.5 uV SSB/CW/FSK (10 dB S+N/N) 0.1-0.15 MHz: 2.5 uV 0.15-0.5 MHz: 1 uV 0.5-1.62 MHz: 4 uV 1.62-30 MHz: 0.2 uV
- Selectivity
- AM (Wide) 6 KHz (-6 dB) 15 KHz (-50 dB) AM (Narrow) 2.4 KHz (-6 dB) 3.8 KHz (-60 dB) FM 12 KHz (-6 dB) 24 KHz (-60 dB) SSB 2.4 KHz (-6 dB) 3.8 KHz (-60 dB) CW (Wide) 400 Hz (-6 dB) 900 Hz (-60 dB) CW (Narrow) 250 Hz (-6 dB) 550 Hz (-60 dB) FSK 2.4 KHz (-6 dB) 3.8 KHz (-60 dB)
- Image rejection
- 80 dB
- AF output power / speaker
- 1.5 W at 10% distortion / 8 ohm
- External speaker connector
- 3.5 mm, 8 ohm
TRANSMITTER SECTION
- Modulation system
- AM: Low level modulation FM: Reactance modulation SSB: Balanced modulation
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -40 dB
- Microphone impedance / connector
- 500 ohm to 5 Kohm / 8-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Kenwood TS-950S Digital