Source: rigpix
Transceivers
Updated: 09/02/2026
Sommerkamp FT-767DX
Confidence score: 50%
Estimated value
275€
Theoretical estimate
234€
Minimum
316€
Maximum
Specifications
GENERAL
- Type
- Amateur HF transceiver
- Frequency range
- 10-80 m + WARC in 11 bands 3.5-4.0 MHz (80 m) 7.0-7.5 MHz (40 m) 10.0-10.5 MHz (30 m) 14.0-14.5 MHz (20 m) 18.0-18.5 MHz (17 m) 21.0-21.5 MHz (15 m) 24.5-25.0 MHz (12 m) 28.0-28.5 MHz (10 m A) 28.5-29.0 MHz (10 m B) 29.0-29.5 MHz (10 m C) 29.5-30.0 MHz (10 m D)
- Tuning steps
- Analog / continuous
- Frequency stability
- ± Less than 300 Hz drift over 30 minutes after 10 minute warmup Less than 100 Hz drift after 30 minute warmup
- Mode
- AM / SSB / CW
- Repeater shift / offset
- No
- Power supply
- 13.5 VDC (4-pin Jones connector)
- Current drain / power consumption
- RX: 1.5 A TX: Max 20 A
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- 240*93*295 mm (9.45*3.66*11.61")
- Weight
- 6.5 Kg (14.33 lb)
RECEIVER SECTION
- Receiver system
- Triple conversion superheterodyne 1st IF: 8.99 MHz 2nd IF: 10.76 MHz 3rd IF: 8.99 MHz
- Sensitivity
- AM: 1 uV (10 dB S/N) SSB/CW: 0.25 uV (10 dB S/N)
- Selectivity
- AM 3.6 KHz (-6 dB) 6.8 KHz (-60 dB) SSB 2.4 KHz (-6 dB) 4 KHz (-60 dB) CW (With 600 Hz filter) 600 Hz (-6 dB) 1.2 KHz (-60 dB) CW (With 350 Hz filter) 350 Hz (-6 dB) 1.2 KHz (-60 dB) (Continuously variable bandwidth from 300 Hz to 2.4 KHz (SSB/CW)
- Image rejection
- 60 dB (80-12 m) 50 dB (10 m)
- AF output power / speaker
- 3 W at 10% distortion / 4 ohm
- External speaker connector
- 3.5 mm, 8 ohm
TRANSMITTER SECTION
- AM
- 40 W
- SSB (PEP)
- 100 W
- CW
- 100 W
- Modulation system
- AM: Low power stage modulation SSB: Balanced modulator
- Max FM deviation (Factory set)
- No FM
- Spurious emissions
- Better than -50 dB
- Microphone impedance / connector
- 500-600 ohm / 8-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Sommerkamp FT-767DX