Source: rigpix
Transceivers
Updated: 08/02/2026
Xiegu X6100
Confidence score: 50%
Estimated value
650€
Theoretical estimate
550€
Minimum
750€
Maximum
Specifications
GENERAL
- Type
- Amateur HF/VHF transceiver
- Frequency range
- TX: 10-160 m + WARC / 6 m RX: 0.5-30 / 50-54 MHz
- Tuning steps
- Down to 1 Hz
- Frequency stability
- ±1.5 ppm @ 25°C (77°F), within 10-30 minutes after power on 1 ppm per hour thereafter
- Mode
- AM / FM / SSB / CW / RTTY
- Channels / memory management
- 200 regular with alpha tags
- Repeater shift / offset
- ±?
- Power supply
- 7.4 VDC (Li-Ion battery pack) or 9-15 VDC external
- Current drain / power consumption
- RX: 330 mA (Average) TX: Max 3 A
- Antenna impedance / connector
- 50 ohm / BNC
- Dimensions (W*H*D)
- 180*86*49 mm (7.09*3.39*1.93")
- Weight
- 880 g (1.94 lb)
- Other features
- 4" color TFT. Built-in auto-ATU. SWR scanner. Voice memory keyer. CW keyer. Bluetooth. WiFi. Built-in sound card. USB-C. I/Q output. Dimmer. Spectrum display (96 KHz) and waterfall. MicroSD card slot. Clock. Internal mike and PTT. CW/RTTY/BPSK decoder.
RECEIVER SECTION
- Receiver system
- SDR, 24-bit
- Sensitivity
- AM (10 dB S/N) 0.5-2.0 MHz: 10 uV 2.0-30 MHz: 2 uV 50-54 MHz: 2 uV FM (12 dB SINAD) 28-30 MHz: 0.22 uV 50-54 MHz: 0.22 uV SSB/CW (10 dB S/N) 1.8-2.0 MHz: 0.35 uV 2.0-30 MHz: 0.2 uV 50-54 MHz: 0.2 uV
- AF output power / speaker
- 400 mW at 10% distortion / 8 ohm
- External speaker connector
- 3.5 mm (Stereo), 4-16 ohm
TRANSMITTER SECTION
- Modulation system
- AM: Low level FM: Variable reactance SSB: Balanced
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- 10-160 m: Better than -50 dB 6 m: Better than -60 dB
- Microphone impedance/connector
- 600 ohm (Nominal) / 8-pin (RJ45 / Modular)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Xiegu X6100