Source: rigpix
Transceivers
Updated: 09/02/2026
Xiegu X6200
Confidence score: 50%
Estimated value
676€
Theoretical estimate
575€
Minimum
777€
Maximum
Specifications
GENERAL
- Type
- Amateur HF/VHF transceiver
- Frequency range
- TX: 10-160 m + WARC and 60 m / 6 m RX: 0.5-30 / 50-54 MHz / 88-108 / 108-136 MHz
- Tuning steps
- Down to 1 Hz
- Frequency stability
- ±1 ppm @ 0-50°C (32-122°F), 20 minutes after power on
- Mode
- TX: AM / FM / SSB / CW / RTTY RX: AM / FM / WFM / SSB / CW / RTTY
- Channels / memory management
- ? regular
- Power supply
- 7.4 VDC (Li-Ion battery pack) or 9-15 VDC external
- Current drain / power consumption
- RX: Max 650 mA TX: Max 3.5 A
- Antenna impedance / connector
- 50 ohm / BNC (20-175 ohm with ATU on)
- Dimensions (W*H*D)
- 200*89*51 mm (7.87*3.5*2")
- Weight
- 880 g (1.94 lb)
- Other features
- 4" color TFT (800*480 pixels) with spectrum/waterfall. Voice and CW memory keyers. Built-in auto-ATU. SWR scanner. Built-in sound card. USB connectivity. WLAN and Bluetooth. Wireless FT8 operation. DRFS platform.
RECEIVER SECTION
- Receiver system
- SDR Direct sampling
- Sensitivity
- AM (10 dB S/N, preamp on) 0.55-1.79 MHz: 10 uV 1.8-28 MHz: 2 uV 28-30 MHz: 2 uV 50-54 MHz: 2 uV 108-136 MHz: <10 uV FM (12 dB SINAD, preamp on) 1.8-28 MHz: 0.2 uV 28-30 MHz: 0.2 uV 50-54 MHz: 0.2 uV SSB/CW (10 dB S/N, preamp on) 1.8-28 MHz: 0.2 uV 28-30 MHz: 0.2 uV 50-54 MHz: 0.2 uV WFM (12 dB SINAD) 88-108 MHz: <5 uV
- AF output power / speaker
- 500 mW at 10% distortion / 4 ohm
TRANSMITTER SECTION
- Modulation system
- AM: Low level FM: Variable reactance SSB: Balanced
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance/connector
- 200 ohm to 10 Kohm (600 ohm nominal) / 8-pin (RJ45 / Modular)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Xiegu X6200