Source: rigpix
Transceivers
Updated: 09/02/2026
Yaesu FT-101
Confidence score: 50%
Estimated value
366€
Theoretical estimate
311€
Minimum
421€
Maximum
Specifications
GENERAL
- Type
- Amateur HF transceiver
- Frequency range
- TX: 10-80 m RX: 10-80 m / 26.9-27.5 MHz / 10-10.5 MHz (WWV)
- Tuning steps
- Analog / continuous
- Frequency stability
- Less than 100 Hz in any 30 minute period
- Mode
- AM / SSB / CW
- Channels / memory management
- 2 optional, XTAL controlled
- Repeater shift / offset
- No
- Power supply
- Mains: 100 / 117 / 200 / 220 / 240 VAC or 11-14 VDC A twelve-prong Amphenol/Cinch-Jones connector has to be wired for either mains or DC voltage
- Current drain / power consumption
- RX: 0.5 A @ 13.8 VDC TX: Max 20 A @ 13.8 VDC
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- 343*152*292 mm (13.5*6*11.5")
- Weight
- 13.61 Kg (30 lb)
- Other features
- NB. VOX. XTAL-calibrator (25 & 100 KHz). IF output.
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 5.52-6.02 MHz 2nd IF: 3.18 MHz
- Sensitivity
- 0.3 uV (10 dB S/N)
- Selectivity
- AM/SSB/CW 2.4 KHz (-6 dB) 4.5 KHz (-60 dB) CW (With optional narrow filter) 600 Hz (-6 dB) 1.2 KHz (-60 dB)
- AF output power / speaker
- 3 W at ?% distortion / ? ohm
TRANSMITTER SECTION
- AM
- +40 W
- SSB (PEP)
- +100 W
- CW
- +100 W
- Max FM deviation (Factory set)
- No FM
- Spurious emissions
- Better than -40 dB
- Microphone impedance / connector
- ? ohm / 4-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Yaesu FT-101