Source: rigpix
Transceivers
Updated: 09/02/2026
Yaesu FT-101FX
Confidence score: 50%
Estimated value
367€
Theoretical estimate
312€
Minimum
422€
Maximum
Specifications
GENERAL
- Type
- Amateur HF transceiver
- Frequency range
- TX: 10-160 m RX: 10-160 m / WWV/JJY (10-10.5 MHz) / 26.9-27.5 MHz The AUX position provides one optional 500 KHz band segment between 14.5 to 28.0 MHz.
- Tuning steps
- Analog / continuous
- Frequency stability
- Less than 100 Hz drift in any 30 minute period
- Mode
- AM / SSB / CW
- Channels / memory management
- 2 optional XTAL controlled
- Repeater shift / offset
- No
- Power supply
- Mains: 100 / 110 / 117 / 200 / 220 / 234 VAC or 11-14 VDC A twelve-prong Amphenol/Cinch-Jones connector has to be wired for either mains or DC voltage
- Current drain / power consumption
- RX: 45 W @ mains - 600 mA @ 12 VDC TX: Max 350 W @ mains - Max 21 A @ 12 VDC
- Antenna impedance / connector
- 50-75 ohm / SO-239
- Dimensions (W*H*D)
- 334*148*284 mm (13.15*5.83*11.18")
- Weight
- 13.6 Kg (29.98 lb)
- Other features
- NB. VOX. XTAL-calibrator (25 & 100 KHz). 3.18 MHz IF output.
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 5.52-6.02 MHz 2nd IF: 3.18 MHz
- Sensitivity
- 0.3 uV (10 dB S/N)
- Selectivity
- AM/SSB/CW 2.4 KHz (-6 dB) 4 KHz (-60 dB) CW (With optional narrow filter) 600 Hz (-6 dB) 1.2 KHz (-60 dB)
- AF output power / speaker
- 3 W at ?% distortion / ? ohm
- External speaker connector
- 4 ohm
TRANSMITTER SECTION
- AM
- +40 W
- SSB (PEP)
- +100 W
- CW
- +100 W
- Max FM deviation (Factory set)
- No FM
- Spurious emissions
- Better than -40 dB
- Microphone impedance / connector
- ? ohm / 4-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Yaesu FT-101FX