Source: rigpix
Transceivers
Updated: 09/02/2026
Yaesu FT-102
Confidence score: 50%
Estimated value
225€
Theoretical estimate
191€
Minimum
259€
Maximum
Specifications
GENERAL
- Type
- Amateur HF transceiver
- Frequency range
- 10-160 m + WARC in 12 bands 1.8-2.0 MHz (160 m) 3.5-4.0 MHz (80 m) 7.0-7.5 MHz (40 m) 10.0-10.5 MHz (30 m) 14.0-14.5 MHz (20 m) 18.0-18.5 MHz (17 m) 21.0-21.5 MHz (15 m) 24.5-25.0 MHz (12 m) 28.0-28.5 MHz (10 m) 28.5-29.0 MHz (10 m) 29.0-29.5 MHz (10 m) 29.5-29.9 MHz (10 m)
- Tuning steps
- Analog / continuous
- Frequency stability
- Less than 100 Hz per hour after 30 minutes warmup
- Mode
- AM / SSB / CW (AM TX and FM RX/TX option)
- Channels / memory management
- No built-in (12 memories in optional FV-102DM)
- Repeater shift / offset
- No dedicated (Use split or memory operation in optional FV-102DM)
- Power supply
- Mains: 100 / 117 / 200 / 234 VAC
- Current drain / power consumption
- RX: 95 VA (Heaters off) TX: Max 440 VA (100 W output)
- Antenna impedance / connector
- 50-75 ohm / SO-239
- Dimensions (W*H*D)
- 368*129*310 mm (14.5*5.08*12.2")
- Weight
- 15 Kg (33.1 lb)
- Other features
- VOX. NB. IF notch.
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 8.2 MHz 2nd IF: 455 KHz
- Sensitivity
- AM: 1 uV (10 dB (S+N)/N), RF-amp on, no optional filter FM: 0.4 uV (20 dB quieting), RF-amp on (with optional AM/FM unit) SSB: 0.25 uV (10 dB (S+N)/N), RF-amp on, no optional filter CW: 0.18 uV (10 dB (S+N)/N), RF-amp on, no optional filter
- Selectivity
- AM/SSB/CW (With no filter options): 2.7 KHz (-6 dB) 4.8 KHz (-60 dB) The "Width" control adjusts continuously from 2.7 KHz to 500 Hz (-6 dB)
- Image rejection
- 1.8-21.5 MHz: >70 dB 24.5-29.9 MHz: >50 dB
- AF output power / speaker
- 1.5 W at 10% distortion / 8 ohm
- External speaker connector
- 4-16 ohm
TRANSMITTER SECTION
- Modulation system
- AM: Low level (with optional AM/FM unit) FM: Variable reactance (with optional AM/FM unit) SSB: Balanced
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -40 dB
- Microphone impedance / connector
- 200-600 ohm / 8-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Yaesu FT-102