Source: rigpix
Transceivers
Updated: 09/02/2026
Yaesu FT-107M
Confidence score: 50%
Estimated value
390€
Theoretical estimate
332€
Minimum
449€
Maximum
Specifications
GENERAL
- Type
- Amateur HF transceiver
- Frequency range
- 10-160 m + WARC in 9 bands (S/N 060001 and up) (Early version did not feature WARC bands = S/N below 060001) 160 m: 1.8-2.0 MHz 80 m: 3.5-4.0 MHz 40 m: 7.0-7.5 MHz 30 m: 10.0-10.5 MHz 20 m: 14.0-14.5 MHz 17 m: 18.0-18.5 MHz 15 m: 21.0-21.5 MHz 12 m: 24.5-25.0 MHz 10 m: 28.0-29.9 MHz Plus WWV/JJY and two AUX bands (Non-WARC version only)
- Tuning steps
- Analog / continuous
- Frequency stability
- ±300 Hz after 10 minutes warmup ±100 Hz after 30 minutes warmup
- Mode
- AM / SSB / CW / FSK
- Channels / memory management
- Optional DMS unit
- Repeater shift / offset
- No
- Power supply
- 13.5 VDC ±10% (Mains option)
- Current drain / power consumption
- RX: Max 1.5 A TX: Max 20 A
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- 334*129*400 mm (13.2*15.1*15.8")
- Weight
- 12.5 Kg (27.6 lb)
- Other features
- VOX. NB. Audio peak and notch. XTAL-calibrator. IF output. SWR-meter.
RECEIVER SECTION
- Receiver system
- Triple conversion superheterodyne 1st IF: 8.98 MHz 2nd IF: 10.75 MHz 3rd IF: 8.98 MHz
- Sensitivity
- AM: 1 uV (10 dB S/N) SSB/CW/FSK: 0.25 uV (10 dB S/N)
- Selectivity
- AM (With optional AM filter) 6 KHz (-6 dB) 12 KHz (-60 dB) SSB 2.4 KHz (-6 dB) 4 KHz (-60 dB) CW (With optional CW filter) 600 Hz (-6 dB) 1.2 KHz (-60 dB)
- AF output power / speaker
- 3 W at 10% distortion / 4 ohm
- External speaker connector
- 4-16 ohm
TRANSMITTER SECTION
- AM/FSK
- 40 W
- SSB (PEP)
- 100 W
- CW
- 100 W
- Modulation system
- AM: Low power stage SSB: Balanced modulator
- Max FM deviation (Factory set)
- No FM
- Spurious emissions
- Better than -50 dB
- Microphone impedance / connector
- 500-600 ohm / 8-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Yaesu FT-107M