Source: rigpix
Transceivers
Updated: 09/02/2026
Yaesu FT-200
Confidence score: 50%
Estimated value
178€
Theoretical estimate
151€
Minimum
204€
Maximum
Specifications
GENERAL
- Type
- Amateur HF transceiver
- Frequency range
- 10-80 m in 8 bands 3.5-4.0 MHz (80 m) 7.0-7.5 MHz (40 m) 14.0-14.5 MHz (20 m) 21.0-21.5 MHz (15 m) 28.0-28.5 MHz (10 m A), optional 28.5-29.0 MHz (10 m B) 29.0-29.5 MHz (10 m C), optional 29.5-30.0 MHz (10 m D), optional
- Tuning steps
- Analog / continuous
- Frequency stability
- Within 100 Hz every 30 minute period after warmup
- Mode
- AM / SSB / CW
- Channels / memory management
- None
- Repeater shift / offset
- No
- Power supply
- Mains: 117 or 234 VAC (Separate FP-200 PSU) or 12 VDC (Separate DC-200 PSU)
- Current drain / power consumption
- RX: ? mA TX: Max ? A
- Antenna impedance / connector
- 50-75 ohm / SO-239
- Dimensions (W*H*D)
- 330*140*279 mm (13*5.5*11")
- Weight
- 7.26 Kg (16 lb)
- Other features
- VOX. ANL. 100 KHz calibrator.
RECEIVER SECTION
- Receiver system
- Single conversion superheterodyne IF: 9 MHz
- Sensitivity
- 0.5 uV (10 dB S/N)
- Selectivity
- SSB: 2.3 KHz (-6 dB) 4 KHz (-60 dB)
- Image rejection
- 50 dB
- AF output power / speaker
- 1 W at 10% distortion / External only
- External speaker connector
- 8 and 600 ohm
TRANSMITTER SECTION
- AM
- +40 W
- SSB (PEP)
- +100 W
- CW
- +100 W
- Max FM deviation (Factory set)
- No FM
- Spurious emissions
- Better than -? dB
- Microphone impedance / connector
- ? ohm / 3-pin (6.3 mm / ¼")
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Yaesu FT-200