Source: rigpix
Transceivers
Updated: 09/02/2026
Yaesu FT-220
Confidence score: 50%
Estimated value
367€
Theoretical estimate
312€
Minimum
422€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF transceiver
- Frequency range
- TX: 144-146 MHz RX: 144-146 MHz (The frequency range is divided into four 500 KHz segments)
- Tuning steps
- Continuous
- Frequency stability
- ±? ppm
- Mode
- FM / SSB / CW
- Channels / memory management
- 4 optional XTAL controlled
- Repeater shift / offset
- -600 KHz
- Power supply
- Mains: 100 / 110 / 117 / 200 / 220 / 234 VAC or 12-14.5 VDC
- Current drain / power consumption
- RX: 600 mA (DC) or 30 VA (AC) TX: Max 3 A (DC) or max 90 VA (AC)
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- 280*125*295 mm (11*4.92*11.6")
- Weight
- 8.5 Kg (18.74 lb)
- Other features
- VOX. NB. 100 KHz calibrator. Repeater tone burst, 1300-3000 Hz adjustable
RECEIVER SECTION
- Receiver system
- Single conversion superheterodyne (SSB/CW) IF: 10.7 MHz Double conversion superheterodyne (FM) 1st IF: 10.7 MHz 2nd IF: 455 KHz
- Sensitivity
- FM: -4 dBV (20 dB QS) SSB/CW: 0.5 uV (10 dB S/N)
- Selectivity
- Europe and USA FM: 15 KHz (-6 dB), 25 KHz (-60 dB) SSB/CW: 2.4 KHz (-6 dB), 4.1 KHz (-60 dB) Japanese domestic market FM: 20 KHz (-6 dB), 40 KHz (-60 dB) SSB/CW: 2.4 KHz (-6 dB), 4.1 KHz (-60 dB)
- Image rejection
- 60 dB
- AF output power / speaker
- 2 W at 10% distortion / 4 ohm
- External speaker connector
- 3.5 mm, 4 ohm
TRANSMITTER SECTION
- FM
- 10 W
- SSB (PEP)
- 10 W
- CW
- 10 W
- Modulation system
- FM: Variable reactance
- Max FM deviation (Factory set)
- ±5 KHz (Europe and USA) ±12 KHz (Japanese domestic market)
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 500-600 ohm / 4-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Yaesu FT-220