Source: rigpix
Transceivers
Updated: 09/02/2026
Yaesu FT-225R
Confidence score: 50%
Estimated value
No price analysis available yet.
Specifications
GENERAL
- Type
- Amateur VHF transceiver
- Frequency range
- TX: 144-148 MHz RX: 144-148 MHz (The frequency range is divided into four 1 MHz bands)
- Tuning steps
- Continuous
- Frequency stability
- Max ? ppm
- Mode
- AM / FM / SSB / CW
- Channels / memory management
- 11 XTAL positions plus one optional PLL memory
- Repeater shift / offset
- ±600 KHz
- Power supply
- Mains: 110 / 117 / 200 / 220 / 234 VAC or 11.5-16 VDC
- Current drain / power consumption
- RX: Max 1.2 A @ 13.6 VDC or 30 VA @ mains TX: Max 6.5 A @ 13.6 VDC or 160 VA @ mains
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- 280*125*315 mm (11*4.92*12.4")
- Weight
- 9 Kg (19.84 lbs)
- Other features
- NB, Dimmer, Attenuator (20 dB), VOX
RECEIVER SECTION
- Receiver system
- Single conversion superheterodyne (AM/SSB/CW) IF: 10.7 MHz Double conversion superheterodyne (FM) 1st IF: 10.7 MHz 2nd IF: 455 KHz
- Sensitivity
- AM: 1 uV (10 dB S/N) FM: 0.35 uV (20 dB QS) SSB/CW: 0.3 uV (10 dB S/N)
- Selectivity
- AM/SSB/CW 2.3 KHz (-6 dB) 4.1 KHz (-60 dB) FM 12 KHz (-6 dB) 28 KHz (-60 dB)
- Image rejection
- 60 dB
- AF output power / speaker
- 2 W at 10% distortion / 4 ohm
TRANSMITTER SECTION
- AM
- 8 W
- FM
- 25 W
- SSB (PEP)
- 24 W
- CW
- 25 W
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 500-600 ohm / 4-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Yaesu FT-225R