Source: rigpix
Transceivers
Updated: 09/02/2026
Yaesu FT-2600M
Confidence score: 50%
Estimated value
64€
Theoretical estimate
55€
Minimum
74€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF transceiver
- Frequency range
- Europe TX: 144-146 MHz RX: 134-174 MHz USA TX: 144-148 MHz RX: 134-174 MHz
- Tuning steps
- 5 / 10 / 12.5 / 15 / 20 / 25 / 50 KHz
- Frequency stability
- ±10 ppm @ -20 to +60°C (-4 to +140°F)
- Mode
- FM / NFM
- Channels / memory management
- 170 regular with alpha tags (8 characters) 1 home 2 Scan edge pairs (PMS) Priority function
- Repeater shift / offset
- ±600 KHz (Programmable ±0 to 4 MHz in 50 KHz steps)
- Power supply
- 13.8 VDC ±10% ("T" connector on pigtail)
- Current drain / power consumption
- RX: 0.4-1 A TX: Max 10 A
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- 160*40*160 mm (6.3*1.58*6.3")
- Weight
- 1.3 Kg (2.87 lb)
- Other features
- CTCSS/PL and DCS with tone search. 1K2/9K6 packet jack (DSUB9). ARTS. ARS. Dimmer. 1750 Hz tone call (Europe). Cloning. PC-programmable.
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 21.7 MHz 2nd IF: 450 KHz
- Sensitivity
- 0.2 uV (12 dB SINAD)
- Selectivity
- FM 12 KHz (-6 dB) 30 KHz (-60 dB) NFM 10 KHz (-6 dB) 24 KHz (-60 dB)
- Image rejection
- 70 dB
- AF output power / speaker
- 3.5 W at 10% distortion / 4 ohm
- External speaker connector
- 3.5 mm, 4 ohm
TRANSMITTER SECTION
- Modulation system
- Variable reactance
- Max FM deviation (Factory set)
- FM: ±5 KHz NFM: ±2.5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 2 Kohm / 6-pin (Modular)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Yaesu FT-2600M