Source: rigpix
Transceivers
Updated: 09/02/2026
Yaesu FT-410
Confidence score: 50%
Estimated value
220€
Theoretical estimate
187€
Minimum
253€
Maximum
Specifications
GENERAL
- Type
- Amateur HF transceiver
- Frequency range
- TX: 10-160 m + WARC / 6 m RX: 0.03-54 MHz
- Tuning steps
- 10 Hz / 1 KHz
- Frequency stability
- ±1 ppm/hour @ 25°C (77°F), after warmup
- Mode
- AM / SSB / CW
- Channels / memory management
- 120 regular 1 scan edge pair (PMS) 1 Alaska emergency channel (5.1675 MHz, USA version only) 5 60 m band channels (USA version only) Non-volatile EEPROM storage
- Repeater shift / offset
- No
- Power supply
- 13.8 VDC ±15%
- Current drain / power consumption
- RX: Max 3.5 A TX: Max 23 A
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- 229*84*217 mm (9*3.3*8.5")
- Weight
- 4 Kg (8.8 lb)
- Other features
- NB. Attenuator. CAT control.
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 67.899 MHz 2nd IF: 24 KHz
- Sensitivity
- AM (6 KHz, 10 dB S+N/N) 1.8-30 MHz: 2 uV 50-54 MHz: 1 uV SSB/CW (2.4 KHz, 10 dB S+N/N) 0.5-30 MHz: 0.25 uV 50-54 MHz: 0.2 uV
- Selectivity
- AM 6 KHz (-6 dB) 20 KHz (-60 dB) SSB/CW Wide 2 KHz (-6 dB) 4.5 KHz (-60 dB) CW Narrow 300 Hz (-6 dB) 1.2 KHz (-60 dB)
- Image rejection
- 80 dB
- AF output power / speaker
- 10 W at 5% distortion / 4 ohm
- External speaker connector
- 3.5 mm, 4-16 ohm
TRANSMITTER SECTION
- AM
- 25 W
- SSB (PEP)
- 100 W
- CW
- 100 W
- Modulation system
- AM: Low-level (Early stage) SSB: Balanced
- Max FM deviation (Factory set)
- No FM
- Spurious emissions
- Better than -50 dB
- Microphone impedance / connector
- 200 to 10 Kohm (600 ohm nominal) / 8-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Yaesu FT-410