Source: rigpix
Transceivers
Updated: 09/02/2026
Yaesu FT-470
Confidence score: 50%
Estimated value
95€
Theoretical estimate
81€
Minimum
109€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF/UHF transceiver
- Frequency range
- Europe TX: 144-146 / 430-440 MHz RX: 144-146 / 430-440 MHz USA TX: 144-148 / 430-450 MHz RX: 144-148 / 430-450 MHz
- Tuning steps
- 5 / 10 / 12.5 / 20 / 25 KHz
- Frequency stability
- ±5 ppm @ -5 to +60°C (41 to 140°F)
- Mode
- FM
- Channels / memory management
- 36 regular (18 per band) 2 call (1 per band) 2 scan edge pairs (1 pair per band) 1 priority 10 DTMF RAM storage with lithium battery backup ((CR2025)
- Repeater shift / offset
- Europe VHF: ±600 KHz UHF: ±1.6 or 7.6 MHz USA VHF: ±600 KHz UHF: ±5 MHz (Defaults, programmable)
- Power supply
- 5.5-15 VDC
- Current drain / power consumption
- RX: 8-150 mA (Single band) TX: Max 1.6 A
- Antenna impedance / connector
- 50 ohm / BNC
- Dimensions (W*H*D)
- 55*164*35 mm (2.16*6.46*1.38"), with FNB-10
- Weight
- 420 g (14.82 oz), with FNB-10
- Other features
- CTCSS/PL. ARS. DTMF. Twin RX. 1750 Hz repeater tone (Europe).
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 17.3 MHz (VHF), 45.1 MHz (UHF) 2nd IF: 455 KHz (VHF), 485 KHz (UHF)
- Sensitivity
- 0.16 uV (12 dB SINAD)
- Selectivity
- 60 dB (Adjacent channel)
- AF output power / speaker
- 500 mW at 5% distortion / 8 ohm (@ 12 VDC)
- External speaker connector
- TS "Minijack" (3.5 mm)
TRANSMITTER SECTION
- Modulation system
- Variable reactance
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 2 Kohm / ?-pin (2.5 mm)
- Microphone input level
- 25 mV @ 1 KHz for ±4.5 KHz deviation
User reviews
Write a review
Share your experience with the Yaesu FT-470