Source: rigpix
Transceivers
Updated: 09/02/2026
Yaesu FT-5100
Confidence score: 50%
Estimated value
279€
Theoretical estimate
223€
Minimum
336€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF/UHF transceiver
- Frequency range
- Europe TX: 144-146 / 430-440 MHz RX: 128-180 / 420-475 MHz USA TX: 144-148 / 430-450 MHz RX: 128-180 / 420-475 MHz (For other versions, see the user manual)
- Tuning steps
- 5 / 10 / 12.5 / 15 / 20 / 25 / 50 KHz
- Frequency stability
- ±5 ppm @ -5 to +50°C (23 to 122°F)
- Mode
- FM
- Channels / memory management
- 92 regular (46 per band) 2 call (1 per band) 2 scan edge pairs/PMS (1 per band) Priority function RAM storage with lithium battery backup
- Repeater shift / offset
- Europe 2 m: ±600 KHz 70 cm: ±1.6 or 7.6 MHz USA 2 m: ±600 KHz 70 cm: ±5 MHz (Defaults, programmable)
- Power supply
- 13.8 VDC ±15%
- Current drain / power consumption
- RX: 600 mA TX: Max 11.5 A
- Antenna impedance / connector
- 50 ohm / SO-239 (On pigtail)
- Dimensions (W*H*D)
- 140*40*155 mm (5.5*1.6*6.1")
- Weight
- 1.0 Kg (2.2 lb)
- Other features
- CTCSS/PL encoder. DTMF paging. ARS. 1750 Hz tone call (Europe). Dimmer. Memory cloning. Twin RX (VV / VU / UU)
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 17.7 MHz (VHF) - 21.7 (UHF) 2nd IF: 455 KHz
- Sensitivity
- 0.16 uV (12 dB SINAD)
- Selectivity
- 12 KHz (-6 dB) 24 KHz (-60 dB)
- Image rejection
- 65 dB
- AF output power / speaker
- 3 W at 5% distortion / 8 ohm
- External speaker connector
- 3.5 mm, 4-16 ohm
TRANSMITTER SECTION
- Modulation system
- Variable reactance
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 600 ohm to 10 Kohm / 8-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Yaesu FT-5100