Source: rigpix
Transceivers
Updated: 09/02/2026
Yaesu FT-625R
Confidence score: 50%
Estimated value
367€
Theoretical estimate
312€
Minimum
422€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF transceiver
- Frequency range
- TX: 50-54 MHz RX: 50-54 MHz (The frequency range is divided into four 1 MHz segments)
- Tuning steps
- Continuous
- Frequency stability
- Within 100 Hz during any 30 minute period after warmup
- Mode
- AM / FM / SSB / CW
- Channels / memory management
- 5 optional XTAL controlled
- Repeater shift / offset
- 1 MHz with default XTAL. Any up to 4 MHz with optional XTAL
- Power supply
- Mains: 100 / 110 / 117 / 200 / 220 / 234 VAC or 13.8 VDC
- Current drain / power consumption
- RX: 35 VA @ mains - 700 mA @ 13.8 VDC TX: 135 VA @ mains - 7 A @ 13.8 VDC
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- 280*125*300 mm (11.02*4.92*11.81")
- Weight
- 9 Kg (19.84 lb)
- Other features
- Dimmer. Tone burst. VOX. 100 KHz marker.
RECEIVER SECTION
- Receiver system
- Single conversion superheterodyne (SSB/CW) IF: 10.81 MHz Double conversion superheterodyne (AM/FM) 1st IF: 10.81 MHz 2nd IF: 455 KHz
- Sensitivity
- AM: 0.5 uV (10 dB S/N) FM: 0.35 uV (20 dB QS) SSB/CW: 0.5 uV (20 dB S/N)
- Selectivity
- AM 4 KHz (-6 dB) 15 KHz (-60 dB) FM 15 KHz (-6 dB) 32 KHz (-60 dB) SSB/CW-W 2.4 KHz (-6 dB) 4.1 KHz (-60 dB) CW-N (With optional CW filter ) 600 Hz (-6 dB) 1.6 KHz (-60 dB)
- Image rejection
- 60 dB
- AF output power / speaker
- 2 W at 10% distortion / 4 ohm
- External speaker connector
- 3.5 mm
TRANSMITTER SECTION
- AM
- 8 W
- FM
- 25 W
- SSB (PEP)
- 25 W
- CW
- 25 W
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- ? ohm / 4-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Yaesu FT-625R