Source: rigpix
Transceivers
Updated: 09/02/2026
Yaesu FT-7100M
Confidence score: 50%
Estimated value
365€
Theoretical estimate
310€
Minimum
420€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF/UHF* transceiver
- Frequency range
- Europe TX: 144-146 / 430-440 MHz RX: 108-180 / 320-480 / 810-1000 MHz USA TX: 144-148 / 430-450 MHz RX: 108-180 / 320-480 / 810-1000 MHz (Cellular blocked)
- Tuning steps
- 5 / 10 / 12.5 / 15 / 20 / 25 / 50 KHz
- Frequency stability
- ±5 ppm @-10 to +60°C (14 to 140°F)
- Mode
- TX: FM / NFM RX: AM / FM / NFM
- Channels / memory management
- 240 with alpha tags (120 per band) 2 home (1 per band) 10 scan edge pairs/PMS (5 per band) Priority function Non-volatile EEPROM storage
- Repeater shift / offset
- ±0-99.50 MHz in 50 KHz steps
- Power supply
- 13.8 VDC ±15% ("T" connector on pigtail)
- Current drain / power consumption
- RX: 500 mA (Squelched) TX: Max 11.5 A
- Antenna impedance / connector
- 50 ohm / N-jack (Europe) - SO-239 (USA)
- Dimensions (W*H*D)
- 140*38*166 mm (5.51*1.5*6.54")
- Weight
- 1 Kg (2.2 lb)
- Other features
- CTCSS/PL & DCS with tone search. Detachable head. ARTS. 1K2/9K6 packet jack. 1750 Hz tone call. ARS. ARTS. Dimmer. Data cloning. Twin RX (VV / VU / UU).
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 21.7 MHz (VHF) - 45.05 MHz (UHF) 2nd IF: 450 KHz (VHF) - 455 KHz (UHF)
- Sensitivity
- 2 m/70 cm: 0.16 uV (12 dB SINAD)
- Selectivity
- 12 KHz (-6 dB) 24 KHz (-60 dB)
- AF output power / speaker
- 2 W at 5% distortion / 8 ohm
- External speaker connector
- 3.5 mm, 4-16 ohm
TRANSMITTER SECTION
- Modulation system
- Variable reactance
- Max FM deviation (Factory set)
- FM: ±5 KHz NFM: ±2.5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 2 Kohm / 6-pin (Modular)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Yaesu FT-7100M