Source: rigpix
Transceivers
Updated: 09/02/2026
Yaesu FT-726R
Confidence score: 50%
Estimated value
310€
Theoretical estimate
264€
Minimum
357€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF/UHF transceiver
- Frequency range
- Europe TX: 144-146 MHz RX: 144-146 MHz USA TX: 144-148 MHz RX: 144-148 MHz (6 m/10 W and 70 cm/10 W options)
- Tuning steps
- 20 / 200 Hz, 5 / 10 / 12.5 / 25 KHz
- Frequency stability
- ±10 ppm (6 & 2 m), ±5 ppm (70 cm), no temperature reference
- Mode
- FM / SSB / CW
- Channels / memory management
- 10 regular 1 call Priority function RAM storage with lithium battery backup
- Repeater shift / offset
- Europe 6 m: ±1 MHz 2 m: ±600 kHz 70 cm: ±1.6 or 7.6 MHz USA 6 m: ±1 MHz 2 m: ±600 KHz 70 cm: ±5 MHz (Defaults, programmable)
- Power supply
- Mains: 100 / 110 / 117 / 200 / 220 / 234 VAC (3-pin IEC C14 connector) or 13.8 VDC (4-pin Jones connector)
- Current drain / power consumption
- RX: 45 VA @ mains / 1.5 A @ 13.8 VDC TX: Max 120 VA @ mains / 4.5 A @ 13.8 VDC
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- 334*129*315 mm (13.15*5.08*12.4")
- Weight
- 11 Kg (24.25 lb), without options
- Other features
- NB. IF-shift. 1750 Hz tone call (Europe), 1800 Hz (USA).
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 10.75-10.81 MHz (6 & 2 m) - 67.615 MHz (70 cm) 2nd IF: 455 KHz
- Sensitivity
- 2 m FM: 0.25 uV (12 dB SINAD) SSB: 0.15 uV (10 dB (S+N)/N) 6 m (Optional) FM: 0.25 uV (12 dB SINAD) SSB: 0.15 uV (10 dB (S+N)/N) 70 cm (Optional) FM: 0.2 uV (12 dB SINAD) SSB: 0.15 uV (10 dB (S+N)/N)
- Selectivity
- FM 15 KHz (-6 dB) 30 KHz (-60 dB) SSB 2.4 KHz (-6 dB) 4.0 KHz (-60 dB) CW (With optional CW filter) 600 Hz (-6 dB) 1.2 KHz (-60 dB)
- Image rejection
- Better than 60 dB
- AF output power / speaker
- 1.5 W at 10% distortion / 8 ohm
- External speaker connector
- 3.5 mm, 4-16 ohm
TRANSMITTER SECTION
- Modulation system
- FM: Variable reactance SSB: Balanced
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 500-600 ohm / 8-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Yaesu FT-726R