Source: rigpix
Transceivers
Updated: 09/02/2026
Yaesu FT-8100R
Confidence score: 50%
Estimated value
61€
Theoretical estimate
52€
Minimum
70€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF/UHF transceiver
- Frequency range
- Europe TX: 144-146 / 430-440 MHz RX: 110-550 / 750-1300 MHz USA TX: 144-148 / 430-450 MHz RX: 110-550 / 750-1300 MHz (Cellular blocked)
- Tuning steps
- 5 / 10 / 12.5 / 15 / 20 / 25 / 50 KHz
- Frequency stability
- 2 m: ±10 ppm @ -20 to +60°C (-4 to +140°F) 70 cm: ±5 ppm @ -5 to +60°C (23 to 140°F)
- Mode
- TX: FM RX: AM / FM
- Channels / memory management
- 198 regular (99 per band) 2 home (1 per band) 4 scan edge pairs/PMS (2 per band) Priority function RAM storage with lithium battery backup
- Repeater shift / offset
- ±0-99.95 MHz in 50 KHz steps
- Power supply
- 13.8 VDC ±15% ("T" connector on pigtail)
- Current drain / power consumption
- RX: Max 1 A TX: Max 10 A
- Antenna impedance / connector
- 50 ohm / N-jack (Europe) or SO-239 (USA), on pigtail
- Dimensions (W*H*D)
- 140*40*165 mm (5.51*1.58*6.5")
- Weight
- 1.0 Kg (2.2 lb)
- Other features
- CTCSS/PL encoder. DTMF. ARS. 1K2/9K6 packet jack. Dimmer. Data cloning. Detachable front panel. Twin RX (VV / VU / UU).
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 45.05 MHz (VHF) - 58.525 MHz (UHF) 2nd IF: 455 KHz
- Sensitivity
- Main: 0.18 uV (12 dB SINAD) Sub: 0.25 uV (12 dB SINAD)
- Selectivity
- 12 KHz (-6 dB) 24 KHz (-60 dB)
- Image rejection
- 70 dB
- AF output power / speaker
- 2 W at 5% distortion / 8 ohm
- External speaker connector
- Two 3.5 mm, 4-16 ohm
TRANSMITTER SECTION
- Modulation system
- Variable reactance
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 2 Kohm / 6-pin (Modular)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Yaesu FT-8100R