Source: rigpix
Transceivers
Updated: 09/02/2026
Yaesu FT-8800R
Confidence score: 50%
Estimated value
215€
Theoretical estimate
172€
Minimum
259€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF/UHF transceiver
- Frequency range
- Europe TX: 144-146 / 430-440 MHz RX: 108-520 / 700-1000 MHz USA TX: 144-148 / 430-450 MHz RX: 108-520 / 700-1000 MHz (Cellular blocked)
- Tuning steps
- 5 / 10 / 12.5 / 15 / 20 / 25 / 50 KHz
- Frequency stability
- ±5 ppm @ 010 to +60°C (14 to 140°F)
- Mode
- TX: FM / NFM RX: AM / FM / NFM
- Channels / memory management
- 512 regular with alpha tags in 10 banks 5 home 10 scan edge pairs (PMS) Priority function 6 hyper Non-volatile EEPROM storage
- Repeater shift / offset
- ±0-99.95 MHz in 50 KHz steps
- Power supply
- 13.8 VDC ±15% ("T" connector on pigtail)
- Current drain / power consumption
- RX: 500 mA (Squelched) TX: Max 8.5 A
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- 140*42*168 mm (5.51*1.65*6.61")
- Weight
- 1 Kg (2.2 lb)
- Other features
- CTCSS/PL and DCS with tone search. DTMF. 1K2/9K6 packet jack. ARTS. WIRES internet. Cross-band repeater. Data cloning. Twin RX.
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 45.05 MHz (Main RX) - 47.25 MHz (Sub RX) 2nd IF: 450 KHz
- Sensitivity
- Better than 0.2 uV (12 dB SINAD), ham bands only
- Selectivity
- NFM: 8 KHz (-6 dB) 30 KHz (-60 dB)
- AF output power / speaker
- 2 W at 5% distortion / 8 ohm
- External speaker connector
- 3.5 mm, 4-16 ohm
TRANSMITTER SECTION
- Modulation system
- Variable reactance
- Max FM deviation (Factory set)
- FM: ±5 KHz NFM: ±2.5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 2 kohm / 6-pin (Modular)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Yaesu FT-8800R