Source: rigpix
Transceivers
Updated: 09/02/2026
Yaesu FT-901DM
Confidence score: 50%
Estimated value
460€
Theoretical estimate
328€
Minimum
592€
Maximum
Specifications
GENERAL
- Type
- Amateur HF transceiver
- Frequency range
- 10-160 m i 9 bands 1.8-2.0 MHz 3.5-4.0 MHz 7.0-7.5 MHz 14.0-14.5 MHz 21.0-21.5 MHz 28.0-28.5 MHz 28.5-29.0 MHz 29.0-29.5 MHz 29.5-29.9 MHz Also 5.0-5.5 or 15.0-15.5 MHz WWV/JJY (RX only)
- Tuning steps
- Analog / continuous
- Frequency stability
- Less than 300 Hz after 10 minute warmup Less than 100 Hz after 30 minute warmup
- Mode
- AM / FM / SSB / CW / FSK
- Channels / memory management
- 1 RX and 1 TX
- Repeater shift / offset
- No dedicated. Use VFO A/B split (With FV-901) or memory split
- Power supply
- Mains: 100 / 110 / 117 / 200 / 220 / 234 VAC or 13.5 VDC (12-pin Jones connector)
- Current drain / power consumption
- RX: 45 W (Heater off) @ 117 VAC RX: 1.1 A (Heater off) @ 13.5 VDC TX: Max 320 W @ 117 VAC TX: Max 21 A @ 13.5 VDC
- Antenna impedance / connector
- 50-75 ohm / SO-239
- Dimensions (W*H*D)
- 342*154*324 mm (13.46*6.06*12.76")
- Weight
- 18 Kg (39.7 lb)
- Other features
- NB. 25 KHz calibrator. VOX. 8.9 MHz IF output. Built-in Curtis 8043 keyer.
RECEIVER SECTION
- Receiver system
- ? conversion superheterodyne
- Sensitivity
- AM: 1 uV (10 dB S/N) FM: 0.3 uV (20 dB quieting) SSB/CW/FSK: 0.25 uV (10 dB S/N)
- Selectivity
- Width control set to "0" AM (With optional AM filter) 6 KHz (-6 dB) 12 KHz (-60 dB) FM 12 KHz (-6 dB) 24 KHz (-60 dB) SSB 2.4 KHz (-6 dB) 4 KHz (-60 dB) CW (With optional CW filter) 600 Hz (-6 dB) 1.2 KHz (-60 dB)
- Image rejection
- 1.8-21 MHz: 60 dB 28 MHz: 50 dB
- AF output power / speaker
- 3 W at 10% distortion / ? ohm
- External speaker connector
- 4-16 ohm
TRANSMITTER SECTION
- AM
- ~40 W
- FM
- ~40 W
- SSB (PEP)
- ~100 W
- CW
- ~100 W
- FSK
- ~40 W
- Modulation system
- AM: Low power stage FM: Variable reactance SSB: Balanced
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -40 dB
- Microphone impedance / connector
- 500-600 ohm / 4-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Yaesu FT-901DM