Source: rigpix
Transceivers
Updated: 09/02/2026
Yaesu FT-90R
Confidence score: 50%
Estimated value
300€
Theoretical estimate
255€
Minimum
345€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF/UHF transceiver
- Frequency range
- Europe TX: 144-146 / 430-440 MHz RX: 100-230 / 300-530 / 810-1000 MHz USA TX: 144-148 / 430-450 MHz RX: 100-230 / 300-530 / 810-1000 MHz (Cellular blocked)
- Tuning steps
- 5 / 10 / 12.5 / 15 / 20 / 25 / 50 KHz
- Frequency stability
- ±5 ppm @ -5 to +60°C (23 to 140°F)
- Mode
- TX: FM RX: AM / FM
- Channels / memory management
- 180 regular with alpha tags (7 characters) 1 home (1 per band) 2 band limit pairs (1 per band) 8 DTMF
- Repeater shift / offset
- Europe VHF: ±600 KHz UHF: ±1.6 or 7.6 MHz USA VHF: ±600 KHz UHF: ±5 MHz (Defaults, programmable from 0-99.95 MHz in 50 KHz steps)
- Power supply
- 13.8 VDC ±15% (T-connector on pigtail)
- Current drain / power consumption
- RX: 350 mA (Squelched) TX: Max 9.5 A
- Antenna impedance / connector
- Europe: 50 ohm / N-jack USA: 50 ohm / SO-239 (M-jack)
- Dimensions (W*H*D)
- 100*30*138 mm (3.94*1.18*5.43")
- Weight
- 640 g (1.41 lb)
- Other features
- CTCSS/PL and DCS with tone search. DTMF. ARTS. 1750 Hz repeater tone. Detachable front panel. Dimmer. 1200/9600 bd packet ready. Data cloning.
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 46.05 MHz 2nd IF: 455 KHz
- Sensitivity
- 0.18 uV (12 dB SINAD)
- Selectivity
- 12 KHz (-6 dB) 24 KHz (-60 dB)
- AF output power / speaker
- 1 W at 10% distortion / 8 ohm
- External speaker connector
- 3.5 mm, 4-16 ohm
TRANSMITTER SECTION
- Modulation system
- Variable reactance
- Max FM deviation (Factory set)
- ±5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 2 Kohm / 6-pin modular
- Microphone input level
- 50 mV @ 1 KHz for ±4.5 KHz deviation
User reviews
Write a review
Share your experience with the Yaesu FT-90R