Source: rigpix
Transceivers
Updated: 09/02/2026
Yaesu FTDX-100
Confidence score: 50%
Estimated value
3661€
Theoretical estimate
3112€
Minimum
4210€
Maximum
Specifications
GENERAL
- Type
- Amateur HF transceiver
- Frequency range
- 10-80 m in eight bands 3.5-4.0 MHz (80 m) 7.0-7.5 MHz (40 m) 14.0-14.5 MHz (20 m) 21.0-21.5 MHz (15 m) 28.0-28.5 MHz (10 m A) 28.5-29.0 MHz (10 m B) 29.0-29.5 MHz (10 m C) 29.5-30.0 MHz (10 m D) Plus three optional AUX bands
- Tuning steps
- Analog / continuous
- Mode
- AM / SSB / CW
- Channels / memory management
- 3 optional XTAL controlled
- Repeater shift / offset
- No
- Power supply
- Mains: 100 / 110 / 117 / 200 / 220 / 234 VAC or 12 VDC with optional DC-DC converter (12-pin Jones connector)
- Current drain / power consumption
- RX: 35 W TX: Max 150 W
- Antenna impedance / connector
- 40-100 ohm / SO-239
- Dimensions (W*H*D)
- 334*153*262 mm (13.15*6.02*10.31")
- Weight
- 13.61 Kg (30 lb)
- Other features
- VOX. 100 KHz calibrator.
RECEIVER SECTION
- Receiver system
- Single conversion superheterodyne IF: 3.18 MHz
- Sensitivity
- Less than 1 uV (10 dB S+N/N)
- Selectivity
- 2.3 KHz (-6 dB) 4.5 KHz (-55 dB)
- AF output power / speaker
- 1 W at 10% distortion / ? ohm
TRANSMITTER SECTION
- AM
- ~15 W (50 W input)
- SSB (PEP)
- ~65 W (120 W input)
- CW
- ~65 W (120 W input)
- Max FM deviation (Factory set)
- No FM
- Spurious emissions
- Better than -40 dB
- Microphone impedance / connector
- ? ohm / 3-pin (1/4" jack)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Yaesu FTDX-100