Source: rigpix
Transceivers
Updated: 09/02/2026
Yaesu FTDX-560
Confidence score: 50%
Estimated value
413€
Theoretical estimate
351€
Minimum
475€
Maximum
Specifications
GENERAL
- Type
- Amateur HF transceiver
- Frequency range
- 10-80 m in eight bands 3.5-4.0 MHz (80 m) 7.0-7.5 MHz (40 m) 14.0-14.5 MHz (20 m) 21.0-21.5 MHz (15 m) 28.0-28.5 MHz (10 m A) 28.5-29.0 MHz (10 m B) 29.0-29.5 MHz (10 m C) 29.5-30.0 MHz (10 m D) Plus two optional AUX bands Also 10.0-10.5 MHz JJY/WWV (RX only)
- Tuning steps
- Analog / continuous
- Frequency stability
- 100 Hz for any 30 minute period after warmup
- Mode
- SSB / CW
- Channels / memory management
- None
- Repeater shift / offset
- No
- Power supply
- Mains: 117 / 220 VAC
- Current drain / power consumption
- RX: ? VA TX: Max ? VA
- Antenna impedance / connector
- 50-100 ohm / SO-239
- Dimensions (W*H*D)
- 400*159*349 mm (15.75*6.25*13.75")
- Weight
- 18.1 Kg (40 lb)
- Other features
- NB. VOX. 25/100 KHz calibrator.
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 5.52-6.02 MHz 2nd IF: 3.18 MHz
- Sensitivity
- 0.5 uV (20 dB S/N @ 14 MHz)
- Selectivity
- SSB/CW: 2.4 KHz (-6 dB) 4.2 KHz (-60 dB) CW narrow (With optional filter) 600 Hz (-6 dB) 1.2 KHz (-60 dB)
- AF output power / speaker
- 1 W at ?% distortion / External only
- External speaker connector
- 8 and 600 ohm
TRANSMITTER SECTION
- SSB (PEP)
- ~250 W (560 W input)
- CW
- ~200 W (430-500 W input)
- Max FM deviation (Factory set)
- No FM
- Spurious emissions
- Better than -40 dB
- Microphone impedance / connector
- ? ohm / 3-pin (1/4" jack)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Yaesu FTDX-560