Source: rigpix
Transceivers
Updated: 09/02/2026
Yaesu FTDX-9000D
Confidence score: 50%
Estimated value
4500€
Theoretical estimate
3500€
Minimum
5500€
Maximum
Specifications
GENERAL
- Type
- Amateur HF/VHF transceiver
- Frequency range
- TX: 10-160 m + WARC / 50-54 MHz RX: 0.03-60 MHz
- Tuning steps
- 1 / 10 Hz (AM/SSB/CW) 100 Hz (FM)
- Frequency stability
- ±0.03 ppm @ -10 to +60°C (14 to 140°F), after 5 minutes warmup
- Mode
- AM / FM / SSB / CW / RTTY / Packet
- Channels / memory management
- 99 regular 5 QMB 9 scan edge pairs (PMS) Non-volatile EEPROM storage (The antenna tuner memory requires a CR2032 lithium battery backup)
- Repeater shift / offset
- 10 m: 0-1 MHz in 10 KHz steps 6 m: 0-4 MHz in 10 KHz steps
- Power supply
- Mains: 90-264 VAC (3-pin IEC C14 connector)
- Current drain / power consumption
- RX: Max 120 VA TX: Max 720 VA
- Antenna impedance / connector
- 50 ohm / Four SO-239 + Two SO-230 (RX only) (16.7-150 ohm HF and 25-100 ohm 6 m with ATU on)
- Dimensions (W*H*D)
- 518*165*438 mm (20.4*6.5*17.3")
- Weight
- 30 Kg (66 lb)
- Other features
- Large multifunction TFT. Data port. PS/2 keyboard jack. Rotator interface jack for direction indication on the TFT. Direct I/O sound card connections. GPS option. CAT control. 32-bit IF DSP. IP3 better than +40 dBm! VOX. CTCSS/PL. Twin identical RX.
RECEIVER SECTION
- Receiver system
- Triple conversion superheterodyne 1st IF: 40.455 MHz (VFO-A) - 40.450 MHz (VFO-B) 2nd IF: 455 KHz (VFO-A) - 450 KHz (VFO-B) 3rd IF: 30 KHz (24 KHz for FM)
- Sensitivity
- AM (10 dB S+N//N, 6 KHz BW) 0.1-1.8 MHz: 3.2 uV 1.8-30 MHz: 2 uV 50-54 MHz: 1 uV FM (12 dB SINAD) 28-30 MHz: 0.5 uV 50-54 MHz: 0.35 uV SSB/CW (10 dB S/+N/N, 2.4 KHz BW) 0.1-50 MHz: 2 uV HF ham bands: 0.2 uV 50-54 MHz: 0.125 uV
- Image rejection
- 70 dB (10-160 m ham bands)
- AF output power / speaker
- 2.5 W at 10% distortion / 4 ohm
- External speaker connector
- 3.5 mm, 4-8 ohm
TRANSMITTER SECTION
- Modulation system
- AM: Low-level (Early stage) FM: Variable reactance SSB: Balanced
- Max FM deviation (Factory set)
- Normal: ±5 KHz Narrow: ±2.5 KHz
- Spurious emissions
- Better than -60 dB (HF) Better than -70 dB (6 m)
- Microphone impedance / connector
- Front: 200 ohm to 10 Kohm (600 ohm nominal) / 3-pin (XLR, balanced) Back: 200 ohm to 10 Kohm (600 ohm nominal) / 8-pin (Metal locking ring connector)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Yaesu FTDX-9000D