Source: rigpix
Transceivers
Updated: 09/02/2026
Yaesu FTM-6000R
Confidence score: 50%
Estimated value
238€
Theoretical estimate
203€
Minimum
274€
Maximum
Specifications
GENERAL
- Type
- Amateur VHF/UHF transceiver
- Frequency range
- USA and Australia TX: 144-148 / 430-450 MHz RX: 108-1000 MHz (Cellular blocked in the US)
- Tuning steps
- 5 / 6.25 / 8.33 / 10 / 12.5 / 15 / 20 / 25 / 50 / 100 KHz
- Frequency stability
- ±2.5 ppm @ -20 to +60°C (-4 to 140°F)
- Mode
- TX: FM / NFM RX: AM / FM / NFM
- Channels / memory management
- 999 regular with alpha tags (6 characters) 1 Home 50 PMS pairs Non-volatile EEPROM storage
- Repeater shift / offset
- ±0 to 99.95 MHz
- Power supply
- 13.8 VDC
- Current drain / power consumption
- RX: 500 mA TX: Max 10 A
- Antenna impedance / connector
- 50 ohm / SO-239
- Dimensions (W*H*D)
- Radio unit:139*42*132 mm (5.47*1.66*5.2") Controller: 140*40*35 mm (5.51*1.6*1.38")
- Weight
- Complete kit: 1.1 Kg (2.43 lb)
- Other features
- CTCSS/PL and DCS. DTMF. ARS. ARTS. Voltmeter. Detachable front panel. Data jack. PC programmable. 1750 Hz tone call. Bluetooth option.
RECEIVER SECTION
- Receiver system
- Double conversion superheterodyne 1st IF: 58.05 MHz 2nd IF: 450 KHz
- Sensitivity
- AM (10 dB S/N) 108-137 MHz: 0.8 uV 300-336 MHz: 0.8 uV NFM (12 dB SINAD) 137-150 MHz: 0.2 uV 150-174 MHz: 0.25 uV 174-222 MHz: 0.3 uV 222-300 MHz: 0.25 uV 336-420 MHz: 0.25 uV 420-520 MHz: 0.2 uV 800-900 MHz: 0.4 uV 900-1000 MHz: 0.8 uV
- Selectivity
- 12 KHz (-6 dB) 30 KHz (-60 dB)
- AF output power / speaker
- 3 W at 10% distortion / 8 ohm
- External speaker connector
- 3.5 mm, 8 ohm
TRANSMITTER SECTION
- Modulation system
- Variable reactance
- FM deviation (Factory set)
- FM: ±5 KHz NFM: ±2.5 KHz
- Spurious emissions
- Better than -60 dB
- Microphone impedance / connector
- 2 Kohm / 6-pin (Modular)
- Microphone input level
- ? mV
User reviews
Write a review
Share your experience with the Yaesu FTM-6000R